2-4 Tons Poultry Livestock Pellet Machine Cattle Feed Manufacturing Plant
Feed pellet machine yield is low
The output of each feed pellet machine is not the same, there are many factors causing low output, and there are many factors leading to the decline of its work efficiency, so we have to figure out the reason for processing, so as to get better output, so what are the reasons for the low output of feed pellet machine?
1. Miscellaneous materials: As the particles machine market increasingly complex, business has become more and more difficult, lead to many customers don't according to the requirements of the manufacturer, raw materials are mixed, this not only caused low yield, more might damage the equipment of the mould, so when using particle feed particles machine manufacturing it is important to note that the source of raw material, bear in mind that not mess with the raw material, otherwise it is easy to appear low particle machine production.
2, replacement staff: granulating process is a very dirty tired work, this will lead to workers changed frequently, and each worker for equipment operation steps are different, so in the case of replacement of workers is very easy to cause low efficiency, reduce production, because each person's work efficiency is different, so the hard to avoid production have difference.
3, raw material moisture: when we use equipment for granulation, because the moisture of raw materials is different, some moisture is low, and some moisture is high, which makes the moisture of raw materials not up to standard, resulting in low production efficiency of equipment.
Parameter:
| Model | SZLH250 | SZLH320 | SZLH350 | SZLH420 | SZLH508 |
| Power(KW) | 22 | 37 | 55 | 110 | 160 |
| Capacity(T/H) | 1 | 2-4 | 5-7 | 8-10 | 15-20 |
| Inner dia(mm) | 250 | 320 | 350 | 420 | 508 |
| Pellet size(mm) | 2-8 | 2-8 | 2-18 | 2-18 | 2-18 |
When we meet the low output of feed pellet machine, we should carefully think about the reasons for low output, so that we can improve the output in the next use, and feed pellet machine requires raw material is powder, crushing coefficient does not exceed 2/3 of the particle diameter, raw material moisture requirements between 10%-15%, This requirement should also be taken into account when considering the causes of low yields.
Features:
1. Wide applicable scope: It can process different materials such as corn, maize, grass, grains, molasses, and some other raw materials.
2. Highly efficient one step gear transmission drive ensures maximum utilization ratio of energy.
3. Full stainless steel feeder; Variable-pitch anti-arch structure; Imported frequency converter control.
4. Stainless steel conditioner extends the conditioning and cooking time. Axial steam spraying port, improving feed cooking efficiency.
5. High precision driving main gear and pinion shaft adopt the carbonizing quenching and hard tooth surface grinding technology, resulting in smooth driving, low noise and long service life.
6. Capacity: We can customize the different capacities from 1 ton per hour to 50 ton per hour or even more.
7. After-sale guarantee: One year warranty and all round after sale service
8. Gearbox: with pinion shaft, main gear, main shaft, quill shaft, gearbox body, manual lubrication system and overload protection system.
9. Coupling assembly: with hub-taper lock bores, bushing-taper locks, S-shaped grid cover etc.
10. One set of roller assembly---two roller system.
11. Ring die special design for low bulk density pelleting
12. Door made with one knife assembly.
13. Feed chute: External discharging can be carried out by pulling out the external discharging lever arm of feed chute to prevent feed from entering the pellet chamber for the convenience of trial run and breakdown removal.
Product Tags:
|
|
BV SGS Cattle Feed Manufacturing Plant 2-4 Tons Livestock Pellet Machine Images
|
